DIN German Standard Cylinder Connectors
Cylinder connector to DIN 477-1 for German outlets, numbers 1, 5 to 11, 13 and 14 listed, in chrome plated brass or 316L stainless steel.
Key features
- DIN 477-1 No. 1, 5, 6, 7, 8, 9, 10, 11, 13 and 14 listed
- Long versions on several numbers
- Chrome plated brass or 316L stainless steel, wrench tightened
- 16 x 1.336 male or 1/4 NPT male outlet
- EPDM or PCTFE gasket by version
Enquire about this product
Priced to your specification. Most enquiries are answered the same working day.
Request a quoteA cylinder connector to the German standard DIN 477-1, for connecting a regulator, supply board or switchover board to a DIN cylinder outlet, directly or through a hose or pigtail. This is the deepest range in the catalogue: DIN 477-1 numbers 1, 5, 6, 7, 8, 9, 10, 11, 13 and 14 are listed, several of them in a long version, each in chrome plated brass or 316L stainless steel with a 16 x 1.336 male or 1/4 NPT male outlet. All are wrench tightened and sealed with an EPDM or PCTFE gasket by version. Numbers outside the list are made to order, and a food grade version to EC 1935/2004 is available.
Specification
| Standard | DIN 477-1 |
|---|---|
| In/Out Connections | 16 x 1.336 male or 1/4 NPT male outlet |
| Material | Chrome plated brass or 316L stainless steel |
| Cylinder Connection | DIN 477-1 No. 1, 5, 6, 7, 8, 9, 10, 11, 13 or 14, others to order |
Downloads
No documents on file for this product yet.
Common questions
- Which DIN 477 numbers do you supply?
- DIN 477-1 numbers 1, 5, 6, 7, 8, 9, 10, 11, 13 and 14 are listed, several in a long version as well, and the other numbers are made to order. Each comes in chrome plated brass or 316L stainless steel with a 16 x 1.336 male or 1/4 inch NPT male outlet on the equipment side, wrench tightened and sealed with an EPDM or PCTFE gasket by version.
- Which gas is DIN 477 No. 6, and which is No. 10?
- No. 6 is the inert gas and carbon dioxide outlet, a W21.8 x 1/14 inch male thread rated to 200 bar. No. 10 is nitrogen on a W24.32 x 1/14 inch male thread. No. 1 is the flammable gas outlet, cut left hand, No. 9 is medical oxygen and No. 11 is nitrous oxide. The number is stamped on the cylinder valve.
- Will a DIN connector fit a BS 341 cylinder?
- No. The DIN 477 No. 6 and the BS 341 No. 3 overlap on the inert gases, but the DIN outlet is a W21.8 male thread and the BS 341 outlet a G 5/8 inch female, so neither connector fits the other's cylinder. If equipment bought for the German standard has to run on UK filled cylinders, a BS 341 connector for the same gas can often be fitted to the regulator instead; check the regulator's inlet connection before ordering.
