S Series 10 In-Line Regulator
Request a quote
Rotarex
S Series 10 In-Line Regulator
Model S10 · In-Line Regulators
Low pressure regulator single stage diaphragm technology + balanced valve.
Maximum Inlet Pressure25 bar
Setting Range3 / 8 bar versions
In/Out ConnectionsG 3/8 or 1/4 in NPT inlet and outlet
Gas CompatibilityOxygen service on the brass and stainless steel versions
Key features
- Balanced valve for steady outlet pressure
- Outlet versions 3 and 8 bar
- Nominal flow 4.5 or 12 Nm3/h nitrogen
- Wall or panel mount with rear thread
- Brass or stainless steel body
Enquire about this product
Priced to your specification. Most enquiries are answered the same working day.
Request a quoteUK stock and next-day dispatch on held lines
Technical selection support before you order
A compact second stage line regulator for laboratory gas supply, built on balanced valve technology for consistent outlet pressure. Rated for a 25 bar inlet with outlet versions of 3 and 8 bar and nominal flows of 4.5 and 12 Nm3/h of nitrogen, it is sized for instruments such as ICP spectrometers, chromatography carrier and shielding gas, emission monitoring and trace impurity analysers. Chrome plated brass or stainless steel body, G 3/8 or 1/4 inch NPT ports, and a rear thread with mounting ring for wall or panel fixing.
Specification
| Maximum Inlet Pressure | 25 bar |
|---|---|
| Setting Range | 3 / 8 bar versions |
| In/Out Connections | G 3/8 or 1/4 in NPT inlet and outlet |
| Gas Compatibility | Oxygen service on the brass and stainless steel versions |
| Stages | single stage |
| Temperature | -20 to +60 C |
| Weight | about 0.6 kg |
| Gauge | low pressure, M10 x 1 or 1/4 in NPT |
| Body Material | chrome plated brass or stainless steel |
| Technology | balanced valve, diaphragm |
| Seat Material | FPM or EPDM (seat gasket) |
Gases
OxygenHydrogen
Downloads
No documents on file for this product yet.
