Series D 230 Dual Stage
Request a quote
Rotarex
Series D 230 Dual Stage
Model D230 · Dual Stage Cylinder Regulators
High-pressure regulator dual-stage piston/bellow technology.
Maximum Inlet Pressure200 bar
Setting Range1 / 3 / 10 bar versions
In/Out Connections16 x 1.336 inlet and G 3/8 outlet, or 1/4 in NPT inlet and outlet
Gas CompatibilityOxygen service on the brass version only
Key features
- Dual stage piston and bellows control
- Outlet settings 1, 3 and 10 bar
- S 20 bellows technology inside
- Rear inlet, right outlet layout
Enquire about this product
Priced to your specification. Most enquiries are answered the same working day.
Request a quoteUK stock and next-day dispatch on held lines
Technical selection support before you order
A dual stage regulator combining piston and bellows technology, built on the bellows of the S 20, for pure, inert and slightly corrosive gases where the outlet pressure must stay exceptionally stable and be set with fine sensitivity. Outlet settings are 1, 3 and 10 bar from a 200 bar inlet, with nominal flows of 2 to 3.5 Nm3/h of nitrogen. The piston is brass or AISI 316L and the bellows bronze or AISI 316L depending on version, the inlet sits at the rear with the outlet to the right, and oxygen service is brass only.
Specification
| Maximum Inlet Pressure | 200 bar |
|---|---|
| Setting Range | 1 / 3 / 10 bar versions |
| In/Out Connections | 16 x 1.336 inlet and G 3/8 outlet, or 1/4 in NPT inlet and outlet |
| Gas Compatibility | Oxygen service on the brass version only |
| Stages | dual stage |
| Temperature | -20 to +60 C |
| Weight | about 1.6 kg |
| Seat Material | PTFE |
| Technology | piston and bellows |
Gases
OxygenHydrogen
Downloads
No documents on file for this product yet.
