Labline S22 Regulator Post Mount Bench/Suspended Version
Modular bellow-technology regulator available for both bench-mounted and ceiling-suspended installations.
Key features
- Post mount for bench or suspended outlets
- One of three S 22 modular configurations
- Bellows regulator, outlet 1, 3 or 10 bar
- Hastelloy diaphragm, bronze or 316L bellows
Enquire about this product
Priced to your specification. Most enquiries are answered the same working day.
Request a quoteThe post mounted version of the modular S 22 laboratory point of use regulator, for bench and suspended installations. The S 22 is a bellows regulator offered in three configurations, and this one shares their pressure data: outlet versions of 1, 3 and 10 bar from a 50 bar inlet, nominal flows of 2 to 3.5 Nm3/h of nitrogen, a Hastelloy diaphragm and bronze or AISI 316L bellows. Ports are G 3/8 or 1/4 inch NPT, with a G 1/4 inlet on the COL version, and the acetylene version is rated 20 bar inlet and must be installed with a flame arrestor.
Specification
| Maximum Inlet Pressure | 50 bar (20 bar acetylene version) |
|---|---|
| Setting Range | 1 / 3 / 10 bar versions (1.5 bar acetylene version) |
| In/Out Connections | G 3/8 or 1/4 in NPT inlet and outlet, G 1/4 inlet on the COL version |
| Gas Compatibility | Oxygen service on the brass and stainless versions at inlet pressures up to 30 bar |
| Temperature | -20 to +60 C |
| Weight | about 1.5 kg |
| Gauge | low pressure, M10 x 1 or 1/4 in NPT |
| Seat Material | EPDM (seat gasket) |
| Technology | bellows, modular point of use |
Gases
Downloads
No documents on file for this product yet.
