Mono Series S 15 In-Line
Point of use integrated diaphragm technology. Available in both aluminium and stainless steel for corrosive gases.
Key features
- Adjustable outlet 0.1 to 10 bar
- 50 Nm3/h nitrogen from a 25 bar inlet
- Aluminium or stainless steel body
- Top inlet, bottom outlet
Enquire about this product
Priced to your specification. Most enquiries are answered the same working day.
Request a quoteA modular point of use regulator with integrated diaphragm control, available in aluminium or stainless steel for corrosive gases, rated 25 bar inlet with an adjustable outlet from 0.1 to 10 bar and a nominal flow of 50 Nm3/h of nitrogen. The diaphragm is AISI 304 on the aluminium version and Hastelloy on stainless, ports are G 3/8 or 1/4 inch NPT with the inlet at the top and the outlet at the bottom, and it is offered in three configurations. Suitable for oxygen. The bellows version of the same family is the Mono S 20.
Specification
| Maximum Inlet Pressure | 25 bar |
|---|---|
| Setting Range | 0.1 to 10 bar |
| In/Out Connections | G 3/8 or 1/4 in NPT inlet and outlet |
| Gas Compatibility | Suitable for oxygen service |
| Temperature | -20 to +60 C |
| Weight | about 1.86 kg aluminium, 3.8 kg stainless steel |
| Gauge | low pressure, M10 x 1 |
| Body Material | aluminium or stainless steel |
| Technology | diaphragm, modular point of use |
| Seat Material | EPDM (seat gasket) |
Gases
Downloads
No documents on file for this product yet.
